Hyson Products Catalog
|
Hyson T4 Gas Springs
All the force of a T3 in a standard T2ISO profile.
Five models (T4-1000 to T4-9500).
Contact forces from 9200 to 95000N.
Full stroke forces from 14900 to 148000N.
Extended stroke lengths to 300mm.
Flexible guide absorbs lateral movement and misalignments in the die.
Flexible piston ring for additional guidance.
Patented safety features protect against over-load, over-pressure, over-stroke.
Variety of mounting and linking options.
|
|
Hyson New Tanker B replaces XP
Over 25% more force than the Super Tanker Series it replaces!
Dynamic lubrication extends spring life.
Bore seal resists contamination and rod damage.
Self-aligning piston rod accepts normal die movement and a degree of sideload.
Nitrided rod resists corrosion.
Tested to over one million cycles
|
|
Hyson Di-Dro Advanced Forming Systems
Di-Dro Advanced Forming Systems
Hydraulic Manifold with Delayed Return Capability!
Very high force in a small envelope.
Adjustable force.
No electronic force.
Adjustable delay.
Can be used in upper and lower applications.
|
|
Hyson Tanker ST
The latest generation of the Tanker® Series.
High force in short heights with contact forces to 15,400 lbs.
Stroke lengths to 225 mm.
Dynamic lubrication extends spring life.
Bore seal resists contamination and rod damage.
Self-aligning piston rod accepts normal die movement and a degree of sideload.
Nitrided piston rod resists corrosion.
Tested to over one million cycles.
|
|
Hyson TNK400 Revised
Tanker® XP 400
Engineered for high performance, long service life.
Dynamic lubrication circulates oil onto seal surfaces with every stroke.
Bore seal design for superior contamination resistance.
Fully adjustable charge pressure.
Available as self-contained or in a hosed system.
Variety of mounting options for die design flexibility.
Tanker® XP 400HS
Replaces 1 ½ in. coil springs!
25 mm/1 inch diameter.
Engineered for service life of 25 million cycles without recharge.
High speed capable.
Tested for service life at over 600 spm.
Variety of mounting options for flexible die design.
|
|
Hyson SRS Gas Springs
The SRS Smooth Return Series is engineered to reduce pad bounce associated with increased return stroke speeds from the press. These innovative gas springs decelerate at the end of the stroke to bring the operation to a smooth, controlled stop.
Built-in return stroke speed dampening to eliminate pad bounce.
Increases part transfer efficiency.
Stroke lengths from 125 mm to 300 mm.
Retrofits to existing dies
|
|
Hyson T3 Series
For the lowest cost per ton.
Now with 12 models including the T3-20000 with full contact force to 75,000 lbs.
Diameters from 3/4 in. to almost 8 in., and contact forces from 380 lbs. to almost 45,000 lbs.
Patented safety guide and rod.
Side port for easy hose connection
|
|
Hyson T3T Series
Same force and diameters as the T3 Series.
SAE-4 (7/16-20) port for use with standard full size hoses.
Uses T2B flange mounts.
Five sizes from 1000 to 9500.
Up to 21,400 lbs. contact force.
|
|
Hyson T2 Mini
Diameters from ½ in. to 1-1/2 in., and contact forces from 95 lbs. to 2383 lbs.
New T2-50 is only 12 mm in diameter!
New generation of T2SS2 stripper springs includes 16 mm and 24 mm diameter models and enhanced features.
|
|
Hyson T2 SC
Applications include heavy gauge blanking, piercing, stripping and shallow depth drawing.
Bore seal sub-compact gas springs.
Includes a 1 in. diameter spring with 955 lbs. of contact force.
Stroke lengths to 50 mm/1.97 in.
|
|
Hyson T2 B
Life in excess of 100,000 stroke meters.
Cartridge design for easy maintenance.
Secondary piston retaining ring for extra protection.
Models from 750 to 7500.
|
|
Hyson T2 ISO
Fully meets ISO 11901, NAAMS, Chrysler-Daimler, Ford and GM die standards.
Modular and welded mounts available to meet automotive die standards as well.
Secondary piston retaining ring for extra protection.
Models from 500-10,000.
|
|
Hyson T2 L-LS
Useful in low shut height applications.
Short overall spring length.
Contact forces from 595 lbs. to 6620 lbs., and stroke lengths from ½ in. to 4 in.
A variety of upper and lower mounting options is available.
|
|
Hyson T2 SL Stock Lifter
For part lifting in transfer and progressive dies!
Now with 170 and 300 models.
Easily adjustable force.
170 models can be hosed together.
Guidance and lift incorporated in one compact design.
|
|
Hosed System Components
All the components you need to create a hosed nitrogen gas system!
|
|
Hyson Manifold
Die designers choose Hyson Products manifold systems for lower pressure rises, improved part quality, and easy maintenance. Manifold systems provide one centralized point for pressurizing and depressurizing, and require no hoses or external fittings
|
|
Hyson Dyne A Lube High Speed Systems
Adds dynamic lubrication to the standard nitrogen manifold, literally spraying oil on the cylinder wall with every stroke of the press. Designed for longer run and higher speed applications
|
|
Hyson Nitro-Dyne Ram Cushion
These offer a variety of advantages over conventional hydraulic and air ram cushions, from design flexibility and lower tooling costs to consistent force and simple retrofits
|
|
Hyson Press Cushions
A pressure system with some type of pin plate. The force of the pressure system is transferred into the die with pressure pins. Press cushions can be installed in a variety of locations regardless of the orientation of the press.
|
|
Hyson Controllable Cam System
With the controllable cam, you can store the energy from the downward motion of the ram and use it later in the press cycle, even as the ram is traveling up. This system is especially useful in delayed piercing operations, and provides increased die design flexibility by controlling the timing and/or speed of events during the work stroke.
|
|
Hyson Roller Cam System
Used for piercing, trimming, flanging and restriking, the roller cam can be mounted as an aerial or die mount unit and can cover both vertical and horizontal angles.
|
|
Hyson Nitro Cam System
This unique cam provides the high forces generated by hydraulics without the attendant hydraulic pumps and complicated plumbing. A single power cylinder can provide power to as many as three cam units. There are no mechanical drivers to take up space and interfere with part handling automation. This versatility allows the die designer the flexibility to make changes to a die late in the design process or even during construction
|
|
Hyson CS2 Series
The redesigned controllable gas spring series features a normally open (NO) cartridge valve that simplifies the control system, combines the charge and bleed ports, and requires only 4 bar/58 psi air pressure. When you need to control return of the pad to achieve part quality and/or simplify part transfer, choose the CS2.
|
|
Hyson DRAC 2 Soft Lock
Engineered for both upper and lower applications where a full pad lockdown is not required, this system uses delay cylinders that operate as normal nitrogen gas cylinders, providing force on the pad in the die. The DRAC 2 soft lock features minimal pad springback, does not require prime and timing cylinders, and allows multiple actions from a single action press.
|
|
Hyson DRAC Positive Lock
This system is designed for lower applications and incorporates prime, timing and delayed return nitrogen cylinders. The DRAC positive lock provides full pad lockdown without springback and full force on contact. It allows multiple actions from a single action press and reduces the number of redraw operations
|
|
Hyson Quick Disconnect Charge Fittings
Selection chart matches charge fittings to the correct gas springs, control panels, pressure monitors and other accessories.
|
|
Hyson Advantages
|
|
Hyson Choosing the right system
|
|
Hyson Maintenance
|
|
Hyson Safety
|
|
Hyson NEW T3 Comparison Chart
|
|
Hyson Thread Identification Chart
How to identify Manifold Inch & Metric Cylinders
|